|
Group: Forum Members
Posts: 34,
Visits: 202
|
Before installing it in the aircraft, I am testing a TRX-2000 with airconnect and skydemon on ipad.
Airconnect is on the TRX-2000 port 2, and display bearingless traffic is enabled on this port.
For this bench test, I put the TRX-2000 in simulation mode so it generates both traffic with bearing and without bearing that are potential collisions.
The TRX-2000 display shows the position of aircraft with a bearing on the screen with a symbol, the bearingless targets are show as a circle around my position. Skydemon shows the aircraft with a bearing on the screen correctly but those without are not shown at all, no circle or anything. However, skydemon shows an alarm when a bearingless aircraft is within the alert range, I have seen show approaches from 9 O'clock or 3 O'clock or 8 O'clock. For example, the alert will say "traffic behind 8 O'clock, 0.0 nm, Level".
The skydemon navigation option "show bearingless targets" has no influence on the behaviour.
Anyone with this set up has this experience?
Is this expected?
How would skydemon know where a bearingless traffic comes from?
Tim, I have a video of both screens (100MB), let me know if you want it.
--Andre
|